基本信息
主管单位:中国建筑材料联合会
主办单位:建筑材料工业技术监督研究中心
杂志类型:月刊
杂志大小:210X285cm
杂志纸张:铜版
杂志开数:大16开256P
部门介绍
主编:徐洛屹
社长:孙继成
常务副社长:刘伟
责任编辑:刘玮 郝雨楠
编辑出版:《门窗》编辑部
电话:010-51164700 59346434
传真:010-51164700
邮箱:mencbjb@126.com
市场部:郝编辑
电话:010-51164700
发行部:郝编辑
电话:010-51164700
网址:www.mczzs.com
地址:北京市朝阳区管庄东里甲一号
邮编:100024
发行信息
国内发行:北京市报刊发行局
国内订阅:全国各地邮局
邮发代号:2-585
国外发行:中国国际图书贸易总公司
发行代号:M3086
国内刊号:CN 11-5552/TU
国际刊号:ISSN 1673-8780
许可证号:京朝工商广字第0053号
广告运营:北京国建伟成文化发展中心
印刷:北京市京津彩印有限公司
定价:20.00元/期 全年240.00元/期 7.00美元/期(国外)
期数:2015年第7期 作者:黄丹娜周起旭 发布者:haoyunan 发布日期:2015-08-20
摘 要:在对门窗品质要求越来越高的今天,专用组角胶作为提高门窗质量的一种关键材料,正在慢慢的得到普及和应用。本文采用拉伸试验机,在常温下对铝合金门窗样角进行角强度压力试验。针对普通组角与注胶组角的角强度试验对比分析,得到注胶组角对角强度的影响,及其在提高门窗整体质量上的重要性。
关键词:拉伸;注胶组角;角强度;试验
Abstract: The qualily of the doors and windows is increasingly high in this days, the special group of angle glus as one of the key materials to improve the quality of the doors and windows, is slowly becoming popular and application. In this paper, cupping machine is used to test the corner strength of aluminum alloy door and window at room temperature. According to the analysis of the corner strength test between the normal grouped angle and the plastic injection angle, the influence of the plastic injection angle on corner strength, and its importance to improve the overall quality of doors and windows.
Key words: stretching, note glue group angle, angle of strength, test
京公网安备 11010502046276号
a> 网络接入服务商:北京中科鸿基网络技术有限公司